SM100
Portable Olfactometer
SM100 Portable Olfactometer is the world’s most accurate in-field odour measuring device, allowing users to quantify ambient odour strength in OU/m3
Why Choosing SM100
Hand-held In-Field Odour Measurement
How do we measure odour while odour is a personal preference? Scentroid’s SM100 Portable Olfactometer is the world’s most accurate in-field odour measuring device that allows users to accurately quantify ambient odour strength in OU/m3. This revolutionary device offers an easy-to-use and cost-effective alternative to estimating odour strength or using expensive odour measuring laboratories. Measuring odor has never before been so convenient!
Features at a Glance
Air Supply Capability
20 minutes per tank of air, allowing for 15-20 samples per tank
Dilution Range
2 - 30,000, using 15 dilution steps (utilising calibration plates)
Light and Portable Design
The reduced size and weight of the SM100 ensures that you can take it on any odour adventure
Unparalleled Reliability
All parts have been meticulously tested using Scentroid's ISO9001 certified quality management systems, ensuring years of service
Full Accordance With
Recognized Odour Standards
The SM100 Portable Olfactometer can conduct a complete odour analysis in full accordance with International Standard EN13725. The SM100 can analyze from a sample bag or be deployed in the field for direct olfactometry and ambient odour measurement.
Comparative Study between SM100 and EN13725 Laboratory
Sample | Lab Results (OU) | SM100i Results (OU) |
|---|---|---|
1 | 116 | 94 |
2 | 108 | 164 |
3 | 139 | 131 |
4 | 201 | 219 |
5 | 1846 | 1441 |
Easy to Use
The SM100 Portable Olfactometer requires no sample bags, no filters to change, and no pumps or other moving parts to maintain.
Draws Sample
The SM100 draws a sample of ambient air via venturi pump and dilutes it using fresh odourless air from a compressed air tank.
Control the Ratio
The operator uses an adjustable sliding valve to control the ratio of fresh to ambient air, which is then fed through a sliding valve into the PTFE face mask.
Instant Results
The valve position indicator displays the sample strength (Dilution to Threshold or OU).
Use SM100 for a
Variety of Industries
Waste Water Treatment Plant
Problem: Residential complaints about odour
Solution: SM100 used to determine ambient odour levels and their sources
Once sources were located and measured, an Odour Assessment was created to indicate that the odour levels could be lowered with alternate operational changes and additional maintenance to existing Odour Suppression systems. Additionally, some sources of residential complaints were found to originated outside of the facility (adjacent farms).
Sewer System Stacks
Problem: Residential complaints about odour
Solution: SM100 used to determine initial ambient odour levels with new Carbon Filter for odour suppression to setup a baseline for future reference
Regular inspections were performed to monitor ambient air and when levels began to rise the Carbon Filter was replaced to minimize odour levels.
Construction
Problem: Newly proposed subdivision required odour emission impact for new residences
Solution: SM100 used to determine ambient odour levels around a Landfill site
Ambient odour levels were measured around the site to determine the distance required for non-detectable odour levels to provide the minimum offset for homes to be built as close as possible to the facility.
Cannabis
Problem: Residential odour complaints
Solution: SM100 used to determine ambient odour levels around the facility to ensure regulatory compliance
Minor Operational changes, such as keeping doors closed during different high odour incidences (ie. cultivation and drying) were sufficient to keep the odour to regulatory levels.
Sample Input Port
The act of sampling is to obtain information on the typical characteristics of an odour source by means of the collection through the use of a sampler. You can connect the SM100 directly to one of our Sample Collection Devices:
Upgrade Available
Ability to upgrade to the SM100i, which removes the manual adjustment of dilution steps.
SM100 Portable Olfactometer Specifications
Subject | Specification |
|---|---|
Product Name | Scentroid Portable Olfactometer |
Dilution Range (Ou/m3) | 2-30,000 (2^15) |
Number of Dilution Steps | 15 (Adjustable Range) |
Air Supply Capacity | 20 minutes |
Presentation Face Velocity | 0.3 |
Tank Pressure | 4500 PSI |
Face Mask | Half face PTFE |
Port | PTFE Sniffing Port |
Wetted Material | Stainless Steel and PTFE |
Power Requirements | None |
Dimensions | Specification |
|---|---|
Weight | 8 lbs |
Size | 16″ x 6″ x 6″ |
Warranty | Specification |
|---|---|
Warranty | 24 Months Full Warranty |
Scentroid is committed to provide our customers with the highest quality products & services. We use established best practices of our industry to meet or exceed your quality expectations. To achieve these objectives and meet the requirements of our customers, we aim to:
- Empower our clients with vast in-depth knowledge, state-of-the-art instruments, and extensive customer support.
- Strive in every aspect of our operation to put our client first and use our research expertise to develop the most innovative and effective products and services in the sensory industry.
- Ensuring the customer needs and expectations are determined and fulfilled with the aim of achieving their utmost satisfaction.
- Striving to deliver products on time with zero defects.
- Training all members of staff in the needs and responsibilities of our quality management system (QMS).
- We strive to continuously improve the effectiveness of the quality management system (QMS) by maintaining, monitoring, reviewing, auditing and enhancing our compliance to ISO 9001:2015
- QMS shall be communicated throughout the organization as well as the system of identifying, reporting, investigating and resolving all non-conformances and taking action to prevent recurrences.
We are so confident of the reliability of our products that we are glad to offer our clients comprehensive 24 month full warranty, covering even the sensors in our equipment! This does not include components such as filters and PID lamps. Our customers get access to our trained and authorized service center for the duration of the warranty subject to the terms and conditions of the warranty. For any related issue, you can reach one of our engineers via email for any technical issue. For fast and efficient support simply email support@scentroid.com
