Samplers
The act of sampling is to obtain information on the typical characteristics of an odour source by means of the collection through the use of a sampler. The most important information about an emission source for odour impact assessment is the odour emission rate (OER), which represents the quantity of odour emitted per unit of time, and is expressed in odour units per second (ou·s−1). Sampling is a key activity necessary to facilitate the formulation and further study of the OER. Whatever your unique odour situation may be, Scentroid has you covered!
Sampler Collection
SH20 STATIC HOOD
The Scentroid Static Hood sampler provides an easy to use and contaminate-free solution for taking air samples from bio-filter beds and other surfaces that have a positive air flow.
SW60 WIND TUNNEL
The Scentroid SW60 is the next generation of wind tunnel samplers (ventilated sampling hoods), used for sampling on solid or liquid surfaces with passive odour emissions in accordance with the EN13725 and VDI3880.
SF450 FLUX CHAMBER
The Scentroid Flux chamber is sampler used to determine levels of emissions from solid or liquid surfaces. Flotation is achieved using 4 stainless steel floats eliminating the need for rubber tubes or foam making the unit easy to clean and maintain.
DS5 STACK DILUTING SAMPLER
The stack sampler is an easy to use device that provides an accurate pre-dilution of high temperature gas emissions with nitrogen or zero-air to minimize condensation inside the sample bag.
VC10 VACUUM CHAMBER
The Scentroid Vacuum Chamber is easy to use, portable, and serves as a cost-effective air sampling collection device. Vacuum chambers are used to pull samples directly without dilution from stack, ambient air, or other sampling devices such as flux chamber or wind tunnel.
Sample Storage
SAMPLING BAGS
Scentroid offers a full line of Sampling Bags including those made of PTFE, Tedlar, Nalophan and Stainless Steel. Scentroid also offers a Do It Yourself kit that provides everything you need to make 100+ Nalophan odour Sampling Bags.
Sampler Purging and Cleaning
SP20 HEATED AIR PURGER
The Scentroid SP20 Heated Air Purger is a revolutionary device designed to provide an effective and reliable cleaning solution for olfactometers, sample bags, PTFE lines, and other equipment which may be contaminated with odours.
SP50 OXIDISATION PURGER
The Scentroid SP50 Oxidisation Purger is a revolutionary device designed to provide an effective and reliable cleaning solution for olfactometers, sample bags, PTFE lines, and other equipment which may be contaminated with odours.