Why Choose SP50 Oxidization Purger
Your One-Stop Cleaning Solution
The Scentroid SP50 Oxidisation Purger is a revolutionary device designed to provide effective and reliable cleaning solutions for olfactometers, sample bags, PTFE lines, and other equipment that may be contaminated by odours. The SP50 provides a mixture of clean air with oxidization gases such as ozone and hydroxyl to effectively decontaminate sampling Tedlar or Teflon bags, sampling probes, or sampling lines. The mixture is injected with the desired concentration to allow high levels of decontamination of any remaining contaminants, bacteria or fungus.
Features at a Glance
Rapid Disinfection
The SP50 uses oxidising molecules such as ozone and hydroxyl to quickly and effectively decontaminate and disinfect all sampling equipment including PTFE tubes, sample bags, and probes
Adjustable Purge for Ozone Intensity
The SP50 injects ozone at the exact concentration which you require. The concentration can be adjusted based on need
Fully Automated Operation
SP50 provides complete automated operation by injecting ozone and switching to vacuum mode on a predefined cycle frequency
Safety In Mind
The SP50 has been built with safety in mind. The purger has a built-in carbon filter that scrubs and cleans contaminated air coming from the equipment being cleaned before it is released into the laboratory.
Benefits of Oxidization
Oxidization is a powerful tool for decontamination. Ozone has demonstrated its decontamination capabilities vs. formaldehyde for bio clean rooms, and high neutralizing effects for several pollutants.
MODE 1
Continuous Ozone Injection
Used when a deeper cleaning of sample bags or probes is desired
The operator sets the ozone concentration levels
The unit provides continuous ozone cleaned air for better decontamination
MODE 2
User Ozone Injection
Used to quickly clean reusable sample bags or probes
The operator sets the ozone concentration levels
The unit injects clean air in continuous mode and ozone with the user presses the “inject ozone” button
PTFE Sampling Bag
Scentroid is the only manufacturer offering PTFE sampling bags. These bags have a much higher resistance to contamination and Scentroid’s PTFE Sampling Bags have a longer holding time than Tedlar bags. They are also the only accepted bag material for all standards.
Must Utilized Industries:
SP50 Oxidization Purger Specifications
Subject | Specification |
|---|---|
Product Name | Scentroid's Heated Air Purger |
Temperature | Adjustable purge temperature to 120 °C |
Vacuum Power | High Vacuum, up to 0.95 atmospheric pressure |
Cycle Time Setting | 1L to 50L sample bags |
Temperature Monitoring | Continuous |
Ports | Built-in carbon filter on inlet and exhaust ports |
Noise | Quiet operation |
Scentroid Quality Policy
Scentroid is committed to provide our customers with the highest quality products & services. We use established best practices of our industry to meet or exceed your quality expectations. To achieve these objectives and meet the requirements of our customers, we aim to:
- Empower our clients with vast in-depth knowledge, state-of-the-art instruments, and extensive customer support.
- Strive in every aspect of our operation to put our client first and use our research expertise to develop the most innovative and effective products and services in the sensory industry.
- Ensuring the customer needs and expectations are determined and fulfilled with the aim of achieving their utmost satisfaction.
- Striving to deliver products on time with zero defects.
- Training all members of staff in the needs and responsibilities of our quality management system (QMS).
- We strive to continuously improve the effectiveness of the quality management system (QMS) by maintaining, monitoring, reviewing, auditing and enhancing our compliance to ISO 9001:2015
- QMS shall be communicated throughout the organization as well as the system of identifying, reporting, investigating and resolving all non-conformances and taking action to prevent recurrences.
24 Month Warranty
We are so confident of the reliability of our products that we are glad to offer our clients comprehensive 24 month full warranty, covering even the sensors in our equipment! This does not include components such as filters and PID lamps. Our customers get access to our trained and authorized service center for the duration of the warranty subject to the terms and conditions of the warranty. For any related issue, you can reach one of our engineers via email for any technical issue. For fast and efficient support simply email support@scentroid.com
