GD600 Gas Dilution System
Automated Calibration Solution
The Scentroid GD600 Gas Dilution System simplifies the calibration of chemical analyzers. GD600 generates its own zero-air by scrubbing the ambient air using its 3-stage filter.
Why choose GD600 Gas Dilution System
Automated Calibration Solution
The Scentroid GD600 Gas Dilution System provides an easy solution to simplify calibrating chemical analyzers. GD600 generates its own zero-air by scrubbing the ambient air using its 3-stage filter. Calibration gases are diluted using zero air or optionally N2 to provide a reference gas of any concentration. This allows the operator to easily conduct multi-point calibration.
By controlling the mass flow of the reference gas, GD600 not only simplifies the calibration process but also reduces the consumption of reference gases. Through the user-friendly android app, the user can command the GD600 to perform single or multiple point calibrations simply by entering the desired gas concentrations and time between samplings for each point.
Features at a Glance
Save on Gas
Reduce calibration gas consumption significantly with the GD600 dilution system. One gas bottle will last multiple calibrations
High Accuracy
Continuous dilution monitoring feedback for 100% reliability and accuracy. Medical grade mass flow controllers with 99.5% dilution accuracy
Power Supply
Built-in battery for total portability. Packaged with 120 – 240v charger unit
Zero Air Generator
Built-in zero air generator provides 7000 ml / min. System has a dilution range of 2 to 5,000
Simple Process
Fully automated dilution so user only need to provide desired dilution and minimum output flow rate
System
Controlled through any device via Bluetooth connectivity. Displays environmental variables including temperature and humidity
Efficient and Cost Saving
The dilution system eliminates the need for sample bags. Normally, 3 gas canisters are required per sensor when calibrating. With this system, 1 bottle will last through multiple calibrations. Plus, there is no longer a need to remove equipment to send to a lab for re-calibration, removing expensive transportation costs and unnecessary labour. All processes are now infield.
Ease of Use
Fully automated dilution. The user is only required to provide desired dilution and minimum output flow rate. Inlet for 0 – 10,000 ml/min dilutes N2/zero air from external sources. Scrubbers with patented porous pellets are then used for removing contaminants. All potentially harmful gases and odours emitted during calibration are also scrubbed clean.
Ideal for Multiple Industries
The GD600 Gas Dilution System is both a versatile and cost-effective solution for all your continuous air quality monitoring needs!
Tablet Operation
To start the dilution the user must input the parameters, the pump speed must also be selected, if not using external zero air, (it is recommended to use 100% for pump speed unless using N2 where the pump speed must be zero) then press the ‘start’ button.
The dilution will run for the specified time after which the dilution will stop, the pump speed must be set back to 0% after the dilution process. The GD600 can be used as a single point or multi point calibration device this can be toggled. For the best results, the dilution ratio is recommended to be less than 400.
GD600 Gas Dilution System Specifications
Subject | Specification |
|---|---|
Product Name | Scentroid GD600 Gas Dilution System |
Durability | Build into a pelican case for ease of transportation and operation |
Inlet | Inlet designed for 0 - 10,000ml / min dilution |
Zero Air Generator | 7000ml / min |
Dilution Range | 40 to 5000 (with build-in air supply) |
Filter Scrubbers | Patented porous pellets |
Power | Built-in Battery, 120 - 240v charger |
Communications | Specification |
|---|---|
System | Bluetooth connection to any Android device |
Support, Device Health, Warranty | Specification |
|---|---|
Device Health | Daily Sensor Health & Replacement Check and Reminders |
Warranty | 24 Months Full Warranty (Parts, Including Sensors) |
Scentroid Quality Policy
Scentroid is committed to provide our customers with the highest quality products & services. We use established best practices of our industry to meet or exceed your quality expectations. To achieve these objectives and meet the requirements of our customers, we aim to:
- Empower our clients with vast in-depth knowledge, state-of-the-art instruments, and extensive customer support.
- Strive in every aspect of our operation to put our client first and use our research expertise to develop the most innovative and effective products and services in the sensory industry.
- Ensuring the customer needs and expectations are determined and fulfilled with the aim of achieving their utmost satisfaction.
- Striving to deliver products on time with zero defects.
- Training all members of staff in the needs and responsibilities of our quality management system (QMS).
- We strive to continuously improve the effectiveness of the quality management system (QMS) by maintaining, monitoring, reviewing, auditing and enhancing our compliance to ISO 9001:2015
- QMS shall be communicated throughout the organization as well as the system of identifying, reporting, investigating and resolving all non-conformances and taking action to prevent recurrences.
24 Month Warranty
We are so confident of the reliability of our products that we are glad to offer our clients comprehensive 24 month full warranty, covering even the sensors in our equipment! This does not include components such as filters and PID lamps. Our customers get access to our trained and authorized service center for the duration of the warranty subject to the terms and conditions of the warranty. For any related issue, you can reach one of our engineers via email for any technical issue. For fast and efficient support simply email support@scentroid.com
