DR2000
ADVANCED FLYING LAB
Our DR2000 Drone Based Air Quality Monitor continues to improve upon the collection and monitoring of airborne chemicals. It can go where no ambient air monitor has gone before; virtually everywhere!
Why choose DR2000
Drone Based Environmental Monitoring
and Air Quality Analyzer
The DR2000 Drone Based Air Quality Monitor provides a robust platform to conduct both impact assessments and air quality measurements for a wide range of applications. This includes the monitoring of: fugitive emissions, flare emissions, leak detection along oil pipe lines, landfill methane, odour emissions, military or emergency applications, urban scanning, and much, much more!
Utilizing the DR2000, operators can not only collect and analyze
valuable data, but the DR2000 can protect operators from contact with potentially dangerous samples. The DR2000 Flying Lab allows for maintaining a safe distance while acquiring a required air sample for laboratory analysis in real time.
Features at a Glance
General Capabilities
The DR2000 can travel any distance above ground level, up to 150 meters for sampling, set intervals for measurement, adjust the sampling rate, and perform maintenance
Lightweight Design
A weight reduction from its predecessor down to ~520 grams now allows for a much more diverse drone portfolio, and less weight grants the operator a longer flight time
Hazardous Sampling
The DR2000 can be flown into environments that are potentially dangerous to personnel, such as harmful contaminants, flare plumes up to 40C or hard to access areas, either vertically or horizontally, for direct sampling
Cloud Access
Live Data, updated every minute, can be accessed on location via the included Ground Station Tablet. Historical data can be accessed remotely using encrypted cloud-based hosting
New and Improved Battery Life!
The DR2000 will come equipped with a fast charge battery for continuous operation of up to 3 hours, before recharging
Ground Station
9 Inch tablet equipped with LoRa communication capabilities and customized DRIMS2 mobile software
Whats's New?
After years of testing and client feedback, we have improved upon the existing DR2000 technology in several ways. First and foremost, a weight reduction to 520g which allows for a much more diverse drone portfolio, and less weight grants the operator a longer flight time. Improved communication capabilities, offer more range and faster/ higher throughput. The onboard sensors, up to 11 total, now boast a significantly shorter warm up time.
A fully Integrated Thermal Vision System can also be installed for visual confirmation of fugitive emissions in a variety of applications such as landfills, storage tanks, and oil/gas pipes.
How It Works
The DR2000 Drone Based Air Quality Monitor now features a brand-new patented sampling system that samples only undisturbed ambient air, completely avoiding propeller downwash.
Analyzes In Flight
The DR2000 analyzes data continuously while in flight at a rate of more than 100 samples per second.
Real-Time Data
The DR2000 transmits to the ground station using Long Range Radio (LoRa protocol), providing a secure & encrypted transmission of data
Types of Data
All Sensor Data is automatically stamped with GPS location (Latitude/Longitude), Elevation, Time, Date, Temperature and Relative Humidity
Drone-Based Software
The data can be used for numerous applications using our proprietary DR2000 analysis software.
Customize Your DR2000
The DR2000 Drone Based Air Quality Monitor measure, monitors and analyzes contaminants using a series of sensors selected based on each unique application. With a library of 100’s of sensors, Scentroid has every sensory requirement covered! Each DR2000 unit can be equipped with:
- Temperature, Relative Humidity, and Barometric Pressure
- High accuracy GPS recording
- High accuracy altitude measurements
- Up to (4) additional sensors any configuration:
- Electro-Chemical (EC) such as Sulfur Dioxide (SO2), Nitrogen Dioxide (NO2), and more
- Total Volatile Organic Compound (TVOC) sensing using Photo-Ionization Detection (PID)
- Carbon Dioxide (CO2), and Methane (CH4) using Non-Dispersive Infrared (NDIR) sensors
- Simultaneous Particulate Matter Sensing capabilities for PM 1, PM 2.5, and PM 10
- Heater Module for High Humidity (Add On Optional)
- Anemometer for Wind Speed and Direction (Add On Optional)
Compatible with a Wide Variety of Drones
Due to its new lightweight design, the DR2000 Drone Based Air Quality Monitor can now be mounted to a much wider series of drones. The DR2000 is completely self-contained and does not require the drone’s battery power or communication capabilities. The drone that the DR2000 is attached to is used solely as a vehicle.
Scentroid can manufacture a customized mounting plate for virtually any drone capable of carrying the payload created by the DR2000. Simply inform us of the drone make and model at the time of order.
Sample Acquisition System
The Scentroid DR2000 can be equipped with a miniature state-of-the-art pumping
system to allow for the collection and storage of air samples within a sampling bag. This easy-to-use system, with one touch activation on the Ground Station Tablet module serves as a cost-effective air sample collection device.
The DR2000 can collect samples directly from hard to reach and/or dangerous locations without the assistance of other sampling devices such as Flux Chambers or Wind Tunnels.
Included With DR2000:
- DR2000 Analyzer
- Ground Station Receiver
- 9" Tablet with Built-In Interface (Ground Station)
- Air Sampling Probe
- Charge adapter
- Zeroing Filter
- Safety Ties
*Does not include drone
Ideal for Multiple Industries
DR2000 Drone Based Air Quality Monitor allows for monitoring and analyzing the air quality in locations that were previously impossible for wide variety of industries.
Horizontally over long distances, such as pipeline monitoring, across wide wastewater lagoons, large acre landfills or agricultural facilities.
Vertical applications such as building exhausts, stacks, and storage tanks
DRIMS2
Drone Information Management System
The Scentroid Drone Information Management System, DRIMS2, our all-inclusive software, is used to view historical data, run diagnostics, configure, and set alarm levels for DR2000. Provided as part of the DR2000 package, the software is installed on our on-board server (default), Scentroid’s cloud-based server (default) and on your localized server (optional).
DRIMS2 is easy to use graphical interface allows anyone to run complicated data analytics without being a GIS expert. It can control and display data from multiple DR2000s in the same fleet. Users can analyze data and monitor progress remotely from a single platform.
DRIMS2 All-Inclusive Software
DRIMS2 provides easy analysis tools for an operator to determine pollutant hot spots, possible sources, sampled areas, and much more.
Ground Station
The Scentroid ground station consists of a specialized tablet connected to a miniature PC with a high gain powerful communication antenna. Our tablets come pre-installed with our DRIMS2 Ground Station component software. This branch of DRIMS2 software provides the user with a means to log all acquired data as it occurs. This includes all live data as well as historical data for sensors, including GPS position, altitude, temperature, and humidity.
The user can also command the drone when to take a sample and when to perform routine maintenance such as calibrating sensors. The readings are continuous, and the user can choose whether to display them live with our diagnostics feature or forward it to a database. If an optional on-board camera is present, a video feed will also be sent to the ground station for simultaneous viewing.
Analysis Software
The DR2000 comes with simultaneous GPRS and Wi-Fi communication capabilities. The GPRS is used to send data to our Scentroid cloud server. Besides using the Ground Station to communicate with our DRIMS2 system, you can also log into our secured DRIMS2 portal using any PC / laptop with a stable internet connection.
Our DRIMS2 Analysis software serves as the perfect companion to any monitoring job – an offsite wealth of information is stored in a beautiful and easy to navigate interface. After securely logging in, users can select their drone, select their flight date, favorite, name, or even search for a specific sampling node.
With access to a heat map along with viewing altitude in a 3D setting, managing a sensory project has never been easier (or more informative!).
Monitoring Ship Emissions & Fuel Sulfur Content with DR2000
DR2000 Drone Based Air Quality Monitor Specifications
Subject | Specification |
|---|---|
Product Name | Scentroid Drone Based Air Quality Monitor |
Maximum Number of Sensors | 11 (4xEC, 1xCO2, 1xPID, 1xCH4, 1xPM, T, RH, Barometer) |
Type of Sensors | PID, NDIR, EC, Laser Particulate Counter, Temperature and Relative Humidity, and barometric pressure |
Sampling Rate | Approximately 1/s |
Probe Length | 44 cm or 88 cm (switchable) |
Time In Flight | Drone dependent, can be mounted to virtually any drone |
On-Board Data Storage | 16GB SD Card |
On-Board Server/Storage | Included by Default |
Temp/Humid Range | 5°C to 40 °C(Temperature) |
Humid Range | 10 - 90% (RH) |
Calibration | Auto-zero before flight. Full sensor calibration recommended once annually |
Mounting Hardware | Customizable mounting lid. Triple mounting safety redundancy to the drone (mounting screws, counter-weight ties, zip ties) |
Location and Altitude | GPS Based with barometric pressure augmentation |
Dimensions | Specification |
|---|---|
Weight | 520-640g |
Size | 230 mm x 108 mm x 103 mm |
Communications | Specification |
|---|---|
Communication | LoRa, GSM/WiFi |
Cloud Server | DRIMS2 (Drone Information Management System) |
Support, Device Health, Warranty | Specification |
|---|---|
Device Health | Daily Sensor Health & Replacement Check and Reminders |
Calibration | Factory Calibrated to Fully Documented Procedures in Accordance with ISO 9001 QMS |
Warranty | 24 Months Full Warranty (Parts, Including Sensors) |
Scentroid is committed to provide our customers with the highest quality products & services. We use established best practices of our industry to meet or exceed your quality expectations. To achieve these objectives and meet the requirements of our customers, we aim to:
- Empower our clients with vast in-depth knowledge, state-of-the-art instruments, and extensive customer support.
- Strive in every aspect of our operation to put our client first and use our research expertise to develop the most innovative and effective products and services in the sensory industry.
- Ensuring the customer needs and expectations are determined and fulfilled with the aim of achieving their utmost satisfaction.
- Striving to deliver products on time with zero defects.
- Training all members of staff in the needs and responsibilities of our quality management system (QMS).
- We strive to continuously improve the effectiveness of the quality management system (QMS) by maintaining, monitoring, reviewing, auditing and enhancing our compliance to ISO 9001:2015
- QMS shall be communicated throughout the organization as well as the system of identifying, reporting, investigating and resolving all non-conformances and taking action to prevent recurrences.
We are so confident of the reliability of our products that we are glad to offer our clients comprehensive 24 month full warranty, covering even the sensors in our equipment! This does not include components such as filters and PID lamps. Our customers get access to our trained and authorized service center for the duration of the warranty subject to the terms and conditions of the warranty. For any related issue, you can reach one of our engineers via email for any technical issue. For fast and efficient support simply email support@scentroid.com
