SW60 WIND
TUNNEL Sampler
Most Accurate and User-Friendly in the World
The next generation of ventilated sampling hoods, the SW60 is used for sampling on solid or liquid surfaces with passive odour emissions in accordance with both EN13725 and VDI3880
Wind Tunnel Sampler Overview:
The Scentroid SW60 is the next generation of wind tunnel samplers (a.k.a. ventilated sampling hoods), used for sampling on solid or liquid surfaces with passive odour emissions in accordance with both EN13725 and VDI3880. Our SW60 wind tunnel sampler offers a number of unique features that make it the most accurate and user-friendly area source sampler in the world.
Scentroid’s wind tunnel sampler is made of state-of-the-art PTFE coated aluminum composite material that is both extremely rigid and ultra-light. The wind tunnel only weighs 10 kg resulting in it being very easy to handle by a single technician. Despite being extremely light, the composite material makes the SW60 Wind Tunnel Sampler tough enough to withstand the toughest working conditions.
Continuous Air Speed Monitoring with the Wind Tunnel Sampler:
Scentroid SW60 wind tunnel sampler has a built-in anemometer, which remotely monitors the exact wind speed within the tunnel. Data is logged and shown on any mobile tablet or phone. This not only significantly increases the accuracy of odour sampling, but also provides a means of setting the airspeed to the exact desired value.
SW60 Wind Tunnel Sampler Operational Guide:
- Connect the air supply to the wind tunnel
- Connect the wind tunnel to a tablet for airspeed measurements
- Connect the vacuum chamber to the sample port
- Adjust airspeed to the desired value
- Acquire sample using the vacuum chamber
Features:
Sources for Sampling: Liquid or solid passive (non-ventilated) sources
Electronic Interface: Direct 3.5 mm jack
Wind Speed Range: 0.15 m/s to 1 m/s with 6″ air supply and 0.15 m/s with 4″ air supply
Battery Capacity: 1.5 hours
Charging Options: 12V DC car outlet, 100-240 volt AC power
Power Supply: 12V – 8Ah deep cycle rechargeable battery. Can also be operated directly from a 12V auto power outlet.
Air Supply: Carbon filter, variable speed blower and flexible aluminum duct enclosed in a waterproof carrying case.
Standards: VDI 3880, EN13725, AS4323
Sample Port: 1/4″ 12 mm stainless steel compression fitting
Removable Floaters: PTFE coated aluminum
Wind Tunnel Material: PTFE coated aluminum composite
Dimensions: 167 cm x 23 cm x 33 cm without floaters installed 167 cm x 23 cm x 74 cm with floaters installed
Weight: 10 kg
Lindvall Design Concept
The Wind Tunnel Sampler has been designed based off of the Lindvall concept, considered the industry’s most accurate wind tunnel design
Uniform Air Flow
The SW60 Wind Tunnel Sampler uses a series of 15 fins to direct the air speed within the chamber, ensuring complete uniform flow
Zero Contamination
The wind tunnel has been completely coated in PTFE aerospace grade aluminum composite with no plastic parts
Continuous Use for More Than 1 Hour
The SW60 Wind Tunnel Sampler battery pack can sustain the blower for 1.5 hours of continuous use
Removable Components
Designed to be handled and deployed by a single technician. The floaters can be dismantled and carried separately.
Variable Air Speed
The Scentroid SW60 has a variable air supply allowing the technician to set any air speed between 0.15 m/s to 1 m/s
Video Resources:
Most Utilized Industries:
Related Products:
Scentroid is committed to provide our customers with the highest quality products & services. We use established best practices of our industry to meet or exceed your quality expectations. To achieve these objectives and meet the requirements of our customers, we aim to:
- Empower our clients with vast in-depth knowledge, state-of-the-art instruments, and extensive customer support.
- Strive in every aspect of our operation to put our client first and use our research expertise to develop the most innovative and effective products and services in the sensory industry.
- Ensuring the customer needs and expectations are determined and fulfilled with the aim of achieving their utmost satisfaction.
- Striving to deliver products on time with zero defects.
- Training all members of staff in the needs and responsibilities of our quality management system (QMS).
- We strive to continuously improve the effectiveness of the quality management system (QMS) by maintaining, monitoring, reviewing, auditing and enhancing our compliance to ISO 9001:2015
- QMS shall be communicated throughout the organization as well as the system of identifying, reporting, investigating and resolving all non-conformances and taking action to prevent recurrences.
We are so confident of the reliability of our products that we are glad to offer our clients comprehensive 24 month full warranty, covering even the sensors in our equipment! Our customers get access to our trained and authorized service center for the duration of the warranty subject to the terms and conditions of the warranty. For any related issue, you can reach one of our engineers via email for any technical issue. For fast and efficient support simply email support@scentroid.com